close
close

How Much Does Floor Stripping And Waxing Cost. This amount represents our basic cost for floor stripping & waxing services based upon the square footage entered. Prices will get higher if you are looking to wax and strip relatively small area, however.

How Much Will My Commercial Floors Strip and Wax Job Cost from www.klein-cleaning.com

Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350) cost of pads, mops, etc. For around $500 to $1,000,you can buy an electric floor stripper/floor wax remover; The larger the floor, the more it will cost to strip, wax, and buff.

How Lengthy Does It Require To Strip And Also Wax A Floor?

Size of the commercial building influences the price of floor strip and wax services. Get fair costs for your specific project requirements. Process for stripping and waxing floors.

This Can Lead To A Hike In The Costs.

The larger the floor, the more it will cost to strip, wax, and buff. Nationally prices average between 30 to 60 cents per sq. Prices will get higher if you are looking to wax and strip relatively small area, however.

Many Floor Service Professionals Use A Base Rate To Ensure They Are Able To Hit Their Profit Margins.

(estimate) = 1.5 cents per square foot ($150.00) How much does it cost for residential floor waxing and stripping? After the floor dries, apply a thin coat of wax with a clean mop, then let it dry

The Cost Of Floor Waxing And Stripping Also Depends On The Cost Of The Products That Are Used For Stripping And Waxing.

For around $500 to $1,000,you can buy an electric floor stripper/floor wax remover; As the professionals calculate the cost of the service per square foot. The team at servicemaster of kalamazoo are experts that monitor the important steps and techniques, using an effective equipment in bespeak to produce a spotless, protective, and also attractive end up to her floors in about 7 hours.

In Many Cases, Stripping Vinyl Floors Is A Very Painstaking And Increasingly Expensive Process.

Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot. Please be informed that other factors are considered that may affect this base price (heavy furniture moving, multiple coats of old floor finish to be removed, occupants in building during service, # of rooms, multiple story buildings with no elevator access, more than. The cost to strip, wax, and buff a floor depends on the given area.


0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published.